K. Siddiqui
Contact
Department of Mechanical & Materials Engineering
Spencer Engineering Building,
Room SEB 2069C
Western University
Tel: 519-661-2111 ext. 87572
Fax: 519-661-3020
ksiddiq@uwo.ca
Publications
Refereed
Published or accepted since 2010
Bold indicates graduate students
-
Jaroslawski, T, Jevnikar, S., Siddiqui, K., and Savory, E., “An experimental investigation on the aerodynamics of the Pseudaletia Unipuncta moth subjected to varying upstream flow conditions” Exp. Thermal Fluid Science (In Press)
-
Dennis, K. and Siddiqui, K., “An Investigation of the Near-Wall Multi-modal Turbulent Velocity Behavior in the Boundary Layer” European Journal of Mechanics /B Fluids, 95, 347-366, 2022
-
Dennis, K. and Siddiqui, K., “Characteristics of the wall temperature field in a mixed convection turbulent boundary layer”, Int. Comm. Heat and Mass Transfer, 131, 105864, 2022
-
Chitsaz, N., Siddiqui, K., Marian, R. Chahl, J., “Numerical and experimental analysis of 3D micro-corrugated wing in gliding flight”, J. Fluid Engineering, 144, 011205, 2022
-
Dennis, K.¸ and Siddiqui, K., “The Influence of Wall Heating on Turbulent Boundary Layer Characteristics During Mixed Convection”, Int. J. Heat and Fluid Flow, 91, 108839, 2021
-
Kilpatrick, R., Hangan, H., Siddiqui, K., Lange, J., and Mann, J., “Turbulent flow characterization near the edge of a steep escarpment” J. Wind Engineering and Industrial Aerodynamics, 212, 104605, 2021
-
Chitsaz, N., Siddiqui, K., Marian, R. Chahl, J., “An experimental study of the aerodynamics of micro corrugated wings at low Reynolds number” Exp. Thermal Fluid Science, 121, 110286, 2021
- Dennis, K., and Siddiqui, K., “Visualization and characterization of thermals in a heated turbulent boundary layer”, Exp. Thermal Fluid Science, 120 (110237), 2020
- Kuska, M., DeGroot, C. and Siddiqui, K., “Investigation of Geothermal Energy Utilization for Thermal Regulation of Aquaculture Raceway”, Int. J. Green Energy, 17, 540-553, 2020
- Jevnikar, S., Siddiqui, K. “Investigation of the influence of heat source orientation on the transient flow behavior during PCM melting using particle image velocimetry” J. Energy Storage, 25, 100825, 2019
- Bashar, M., Siddiqui, K. "Experimental investigation of transient melting and heat transfer behavior of nanoparticle-enriched PCM in a rectangular enclosure” J. Energy Storage, 18, 485-497, 2018.
-
Bashar, M., Siddiqui, K. “Investigation of heat transfer during melting of a PCM by a U-shaped heat source” Int. J. Energy Research, 41, 2091-2107, 2017.
-
Lange, J., Mann, J., Berg, J., Parvu, D., Kilpatrick, R., Costache, A., Chowdhury, C., Siddiqui, K., Hangan, H. “For wind turbines in complex terrain, the devil is in the detail”, Environ. Res. Lett., 12, 094020, 2017
-
Kalbfleisch, A., Siddiqui, K. “The effect of mesh-type bubble breaker on two-phase vertical co-flow” Int. J. Multiphase Flow, 94, 1-16, 2017
-
Steen, B. and Siddiqui, K. “Investigation of flow and thermal behaviour in a pipe submerged in a hot fluid”, Int. J. Thermal Science, 111, 18-29, 2017
-
Kilpatrick, R., Hangan, H., Siddiqui, K. Parvu, D., Lange, J., Mann, J. and Berg, J. “Effect of Reynolds number and inflow parameters on mean and turbulent flow over complex topography” Wind Energy Science, 1, 237-254, 2016
-
Jobehdar, M.H., Siddiqui, K., Gadallah, A.H. and Chishty, W.A. “Effect of atomizer internal geometry on the internal and external two-phase flow in effervescent atomization” Atomization and Sprays, 27, 169-188, 2017
-
Jobehdar, M.H., Siddiqui, K., Gadallah, A.H. and Chishty, W.A. “Bubble formation process from a novel nozzle design in liquid cross-flow” Int. J. Heat Fluid Flow, 61, 599-609, 2016
-
Jubayer, C., Siddiqui, K. and Hangan, H. “CFD analysis of convective heat transfer from ground mounted solar panels”, Solar Energy, 133, 556-566, 2016
-
Hashemi-Tari, P., Siddiqui, K. and Hangan, H. “Flow Characterization in the near-wake region of a horizontal axis wind turbine” Wind Energy (Published online; DOI: 10.1002/we.1895)
-
Jobehdar, M.H., Siddiqui, K., Gadallah, A.H. and Chishty, W.A. “Effect of single- and multi-hole bubble breakers on the effervescent atomization process” Atomization and Sprays,26, 135-162, 2016
-
Greig, D., Siddiqui, K., Karava, P., and Elatar, A. “Investigation of fundamental flow mechanisms over a corrugated waveform using proper orthogonal decomposition and spectral analyses” Int. J. Thermal Science,96, 160-172, 2015
- Elatar, A. and Siddiqui, K. “The characteristics of coherent structures in low Reynolds number mixed convection flows” Fluid Dynamics Res., 47, 035509, 2015
- Abiola-Ogedengbe, A. Hangan. H. and Siddiqui, K. “Experimental investigation of wind effects on a standalone photovoltaic (PV) module” Renewable Energy, 78, 657-665, 2015
- Elatar, A. and Siddiqui, K. “Flow development during low Reynolds number mixed convection” Int. J. Thermal Science, 90, 351-369, 2015
- Sandhu, G., Siddiqui, K. "Investigation of the fluid temperature field inside a flat-plate solar collector" Heat Mass Transfer, 50, 1499–1514, 2014.
- Elatar, A. and Siddiqui, K. “The effect of mixed convection on the structure of channel flow at low Reynolds numbers” Int. J. Heat and Fluid Flow, 46 29-42, 2014
- Sandhu, G., Siddiqui, K. and Garcia, A. “Experimental study on the combined effects of inclination angle and insert devices on the performance of a flat-plate solar collector” Int. J. Heat Mass Transfer, 71, 251-263, 2014.
- Hashemi-Tari, P., Siddiqui, K. and Hangan, H. “Wind Tunnel Investigation of the Near-wake Flow Dynamics of a Horizontal Axis Wind Turbine” Journal of Physics: Conf. Ser., 524, 012176, 2014.
- Elatar, A. and Siddiqui, K. “The influence of bottom wall heating on the mean and turbulent flow behaviour in the near wall region during mixed convection” Int. J. Thermal Science, 77, 233-243, 2014.
- Khan, F., and Siddiqui, K. “3D numerical investigation of ZnO/Zn hydrolysis for hydrogen production” Int. J. Energy Research, 38, 391-403, 2014.
- Khan, F., and Siddiqui, K. “Numerical investigation of thermal disassociation of ZnO for hydrogen production: Parametric study and reactor configuration” Int. J. Energy Research, 38, 78-93, 2014.
- Greig, D., Siddiqui, K., and Karava, P. “The influence of surface heating on the flow dynamics within a transpired air collector” Int. J. Heat and Mass Transfer 56¸390-402, 2013.
- Greig, D., Siddiqui, K., and Karava, P. “An experimental investigation of the flow structure over a corrugated waveform in a transpired air collector” Int. J. Heat and Fluid Flow, 38, 133-144, 2012.
- Bukhari, S.J.K, and Siddiqui, K., "The structure of thermal field underneath an evaporative water surface", Int. J. Thermal Sciences 50, 930-934, 2011.
- Abderrahmane, H. A., Amaouche, M., Fayed, M., Ng, H. D., Vatistas, G. H., and Siddiqui, K. “Azimuthal solitary surface wave in cylindrical tank” Physical Review E, 84, 037302, 2011.
- Abderrahmane, H. A., Siddiqui, K., Vatistas, G. H., Fayed, M. and Ng, H.D., and. “Symmetrization of polygonal hollow-core vortex through beat-wave resonance” Physical Review E, 83, 056319, 2011.
- Babaei, H. and Siddiqui, K., “Modified theoretical model for thermoacoustic couples” Int. J. Thermal Sciences, 50, 206-213, 2011.
- Abderrahmane, H. A., Siddiqui. K. and Vatistas, G. H. “Rotating waves within a hollow vortex core” Exp. Fluids, 50, 677-688, 2011.
- Shaikh, N. and Siddiqui, K. “Near surface flow structure over wind-generated water waves, Part I: Wave-induced flow characteristics” Ocean Dynamics, 61, 127-141, 2011.
- Shaikh, N. and Siddiqui, K. “Near surface flow structure over wind-generated water waves, Part II: Characteristics of Separated and non-separated flows” Ocean Dynamics, 61, 143-154, 2011.
- Yan, G., Rakheja, S. and Siddiqui, K., “Analysis of transient fluid slosh in partly filled tanks with and without baffles: Part I. Model validation” Int. J. Heavy Vehicle Systems, 17, 359 – 379, 2010.
- Yan, G., Rakheja, S. and Siddiqui, K., “Analysis of transient fluid slosh in partly filled tanks with and without baffles: Part II. Role of baffles” Int. J. Heavy Vehicle Systems,17, 380 – 406, 2010.
- Wang, M. and Siddiqui, K., “The impact of geometrical parameters on the thermal performance of a solar receiver of dish-type concentrated solar energy system” Renewable Energy,35, 2501-2513, 2010.
- Sookdeo, S., and Siddiqui, K., “Investigation of flow field inside flat-plate collector tube using PIV technique” Solar Energy, 84, 917-927, 2010.
- Shaikh, N. and Siddiqui, K. “An experimental investigation of the near surface flow over air-water and air-solid interfaces” Phys. Fluids, 22, 025103, 2010.
- Nabavi, M. and Siddiqui, K., “A critical review on advanced velocity measurement techniques in pulsating flows” Meas. Sci Technol. 21, 042002, 2010.
- Gajusingh, S. T., Shaikh, N. and Siddiqui, K., “The Influence of a Rectangular Baffle on the Downstream Flow Structure” Exp. Thermal Fluid Science, 34, 590-602, 2010.
- Siddiqui, K. and Loewen, M. “Phase-averaged flow properties beneath microscale breaking waves” Boundary Layer Meteorology, 134, 499-523, 2010.