Publications

Articles in Refereed Journals

  1. Y Shamiya, A Chakraborty, A Zahid, N Bainbridge, J Guan, B Feng, D Pjontek, S Chakrabarti, A Paul (2024). Ascorbyl palmitate nanofiber-reinforced hydrogels for drug delivery in soft issues. Communications Materials, doi: 10.1038/s43246-024-00641-x

  2. M Zhang, D Pjontek, H Wang, M Liu, X Han, Y Zeng, C Xu (2024). Upgrading Fast Pyrolysis Oil with Vacuum Gas Oil by Catalytic Hydrodeoxygenation in Supercritical Ethanol. Energy & Fuels, doi: 10.1021/acs.energyfuels.4c00624

  3. J Guan, A Saherwala, V Vijayakumar, D Pjontek (2024). CO2 Hydrogenation to Methanol in a Slurry Reactor: Catalytic Performance of CuO-Enhanced In2O3/ZrO2. Industrial and Engineering Chemistry Research, doi: 10.1021/acs.iecr.3c03647

  4. J Godin, F Sanchez, D Pjontek, C Briens, J McMillan (2023). Study of hydrodynamics and particle entrainment for a 0.6 m diameter fluidized bed of a large group A powder. Powder Technology, doi: 10.1016/j.powtec.2022.118179

  5. G Chegini, C Briens, D Pjontek (2023). Production and characterization of adsorbents from a hydrothermal char by pyrolysis, carbon dioxide and steam activation. Biomass Conversion and Biorefinery, doi: 10.1007/s13399-022-02439-8

  6. C Briens, J Idowu, FJ Sanchez, D Pjontek, J McMillan (2022). Spraying Slurries in Fluidized Beds: Impact of Slurry Properties on Spray Characteristics and Agglomerate Formation. Canadian Journal of Chemical Engineering, doi: 10.1002/cjce.24324

  7. T Nan, S Sabret, H Zhou, D Pjontek, J Zhu (2022). Preliminary study on a counter-current bubble column near flooding point and an inverse gas-liquid-solid circulating fluidized bed. Powder Technology, doi: 10.1016/j.powtec.2022.117356

  8. C Briens, E Pazoki, D Pjontek, C McKnight, J Wiens, M Wormsbecker, J McMillan (2022). New Measurement Method for Fast Vapor Adsorption on Particles. Measurement, doi: 10.1016/j.measurement.2022.111025

  9. M Nelson, S Srabet, T Nan, D Pjontek, Jesse Zhu (2022). Modified correlation for minimum fluidization velocity of low-density particles in inverse liquid-solid fluidized beds. Particuology, doi: 10.1016/j.partic.2022.01.016

  10. E Glatt, D Pjontek, CA McKnight, J Wiens, M Wormsbecker, J McMillan (2021). Hydrocarbon condensation modelling to mitigate Fluid Coker cyclone fouling. Canadian Journal of Chemical Engineering, doi: 10.1002/cjce.23830 (Selected for special Issue in honour of International Women in Engineering Day)

  11. J Meng, D Pjontek, Z Hu, J Zhu (2020). Hydrodynamics of a Gas-Driven Gas-Liquid-Solid Spouted Bed with a Draft Tube. Canadian Journal of Chemical Engineering, doi: 10.1002/cjce.23819

  12. A Yip, D O’Malley, A Meddaoui, J Marton, D Pjontek, J Haelssig (2020). Fluid Dynamics and Gas-Liquid Mass Transfer in a Vertically-Oscillating Multiphase Reactor. Chemical Engineering Science, 225, 2, doi: 10.1016/j.ces.2020.115817

  13. C Krutpijit, B Jongsomjit, D Pjontek, JE Herrera (2020). Lithium promotion in ethanol oxidative dehydrogenation over Al- modified Ag/Montmorillonite clays. Molecular Catalysis, 483, doi: 10.1016/j.mcat.2019.110717

  14. B Pomeroy, T Doxtator, JE Herrera, D Pjontek (2019). Effect of Ni reducibility on anisole hydrodeoxygenation activity in the La-Ni/Al2O3 catalytic system. International Journal of Chemical Reactor Engineering, 18, 2, doi: 10.1515/ijcre-2019-0066

  15. C Lane, A Macchi, D Pjontek, CA McKnight, J Wiens, A Donaldson (2019). Modelling the fluid dynamics of a commercial ebullated bed hydroprocessor. Industrial & Engineering Chemistry Research, 58, 39, 18387-18396, doi: 10.1021/acs.iecr.9b02779

  16. D Kankariya, C Briens, D Pjontek, S Tacchino (2018). Effects of liquid feed rate and impeller rotation speed on the overall heat transfer coefficient in a mechanically fluidized reactor. Particuology, 39, 25-32, doi: 10.1016/j.partic.2017.10.007

  17. S MacIntyre, A Hammad, Dominic Pjontek (2017). Particle agglomeration studies in a slurry bubble column due to liquid bridging: Effects of particle size and sparger design. Chemical Engineering Science, 170, 213-224, doi: 10.1016/j.ces.2017.02.021

  18. V Parisien, D Pjontek, CA McKnight, J Wiens, A Macchi (2017). Impact of catalyst density distribution on the fluid dynamics of an ebullated bed operating at high gas holdup conditions. Chemical Engineering Science, 170, 491-500, doi: 10.1016/j.ces.2017.02.003

  19. V Parisien, A Farrell, D Pjontek, CA McKnight, J Wiens, A Macchi (2016). Bubble swarm characteristics in a bubble column under high gas holdup conditions. Chem. Eng. Sci., 157, 88-98. doi:10.1016/j.ces.2016.04.051

  20. D Pjontek, CA Mcknight, J Wiens, A Macchi (2015). Ebullated bed fluid dynamics relevant to industrial hydroprocessing. Chem. Eng. Sci. 126, 730–744. doi:10.1016/j.ces.2015.01.002

  21. D Pjontek, V Parisien, C Farrell, CA McKnight, J Wiens, A Macchi (2014). Particle agglomeration in gas-liquid-solid fluidized beds with a dispersed immiscible liquid: Study on particle size, shape and material. Powder Technol. 266, 45–60. doi:10.1016/j.powtec.2014.06.002

  22. D Pjontek, V Parisien, A Macchi (2014). Bubble characteristics measured using a monofibre optical probe in a bubble column and freeboard region under high gas holdup conditions. Chem. Eng. Sci. 111, 153–169. doi:10.1016/j.ces.2014.02.024

  23. D Pjontek, A Macchi, (2014). Hydrodynamic comparison of spherical and cylindrical particles in a gas–liquid–solid fluidized bed at elevated pressure and high gas holdup conditions. Powder Technol. 253, 657–676. doi:10.1016/j.powtec.2013.12.030

  24. D Pjontek, J Landry, CA McKnight, LP Hackman, A Macchi, (2011). Effect of a dispersed immiscible liquid phase on the hydrodynamics of a bubble column and ebullated bed. Chem. Eng. Sci. 66, 2224–2231. doi:10.1016/j.ces.2011.02.040

  25. A Khelifa, B Fieldhouse, Z Wang, C Yang, M Landriault, MF Fingas, CE Brown, L Gamble, D Pjontek, (2007). A laboratory study on formation of oil-SPM aggregates using the NIST standard reference material 1941b. In Artic and Marine Oilspill Program Technical Seminar (Vol. 30, No. 1, p. 35).

Book Chapter

  1. D Pjontek, A Donaldson, A Macchi (2020). Three-phase (Gas-Liquid-Solid) Fluidization in "Essentials of Fluidization", edited by J Grace, X Bi, N Ellis, Wiley, doi: 10.1002/9783527699483.ch22

Conference Presentations

  1. J Guan, D Pjontek (2022). Hydrogenation of carbon dioxide to methanol in a slurry reactor: catalytic performance of Cu-In-Zr oxide catalysts. Canadian Chemical Engineering Conference (CCEC), Vancouver, Canada. Oral presentation.

  2. J Guan, A Saherwala, V Vijayakumar, D Pjontek (2022). Methanol synthesis via CO2 hydrogenation in a slurry reactor using In2O3-based catalysts. 15th International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering (GLS-15). Ottawa, Canada. Oral presentation.

  3. J Idowu, D Pjontek, C Briens, J McMillan (2021). Spraying Slurries: Impact of Slurry Properties on Spray Characteristics and Agglomerate Formation in Fluidized Beds. CFB 13, online conference. Oral presentation.

  4. S Srabet, J Zhu, D Pjontek (2019). Bed Voidage Predictions for Inverse Liquid-Solid Fluidized Beds. CSME-CFDSC Congress 2019, London, Canada. Oral presentation.

  5. S Srabet, J Zhu, D Pjontek (2019). Minimum Fluidization Velocity of Inverse Liquid-Solid Fluidized Bed Using Light Solid Particles. CSME-CFDSC Congress 2019, London, Canada. Oral presentation.

  6. B Pomeroy, T Doxtator, J Buono, J Herrera, D Pjontek (2018). Tuning of HDO activity on Ni/γ-Al2O3 and Ni/SiO2 systems by Lanthanum and Niobium doping. XXIX Interamerican Congress of Chemical Engineering, Toronto, Canada. Oral presentation.

  7. E Glatt, D Pjontek (2018). Cyclone fouling model development for Fluid Coker bitumen upgrading reactors. XXIX Interamerican Congress of Chemical Engineering, Toronto, Canada. Oral presentation.

  8. A Yip, D O'Malley, T Doxtator, J Li, D Pjontek, J Haelssig (2018). Numerical Simulation of Mass Transfer in a Vertically Oscillating Reactor. XXIX Interamerican Congress of Chemical Engineering, Toronto, Canada. Oral presentation.

  9. J Idowua, F Sanchez, C Briens, D Pjontek, J McMillan (2018). Effect of Stray Solid Particles on Spray Nozzle Performance and Agglomeration. XXIX Interamerican Congress of Chemical Engineering, Toronto, Canada. Oral presentation.

  10. S MacIntyre, M Atkinson, D Pjontek (2017). Particle agglomeration studies in a slurry bubble column due to liquid bridging: Effects of particle size and sparger design. 13th International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering (GLS 13), Brussels, Belgium. Oral presentation.

  11. B Pomeroy, D Yun, J Herrera, D Pjontek (2017). Lanthanum induced stabilization of a Ni-Cu Bimetallic Catalysts for Anisole Hydrodeoxygenation in a Novel Externally Agitated Reactor. 13th International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering (GLS 13), Brussels, Belgium. Poster.

  12. G Chegini, F Sanchez Careaga, D Pjontek, C Briens (2017). Impact of Pyrolysis heating characteristics on leachability of biochar minerals. TC Biomass, Chicago, United States. Oral presentation.

  13. S MacIntyre, M Atkinson, D Pjontek (2016). Agglomeration studies in a slurry bubble column: Effects of immiscible liquid loading and viscosity. Canadian Chemical Engineering Conference, Vancouver, Canada. Oral presentation.

  14. D Kankariya, S Tacchino, D Pjontek, F Berruti, C Briens (2016). Development of a mobile 100 kg/h plant for pyrolysis using a mechanically fluidized reactor. 5th international congress on green process engineering (GPE 2016), Mont Tremblant, Canada. Poster.

  15. G Chegini, C Briens, D Pjontek (2016). Effect of heating rate on digestate pyrolysis for biochar production using the Jiggle Bed Reactor. Advanced Biofuels Symposium, Vancouver, Canada.

  16. V. Parisien, A. Farrell, D. Pjontek, A. Macchi (2015). Comparison of monofibre optical probe and dynamic gas disengagement techniques for local and global bubble characteristics in a bubble column at high gas holdups conditions. 12th International Conference on Gas-Liquid and Gas-Liquid-Solid Reactor Engineering (GLS 12), New York, United States. Oral presentation.

  17. D. Pjontek, C. McKnight, J. Wiens, A. Macchi (2014). Ebullated bed fluid dynamics relevant to industrial hydroprocessing, 64th Canadian Chemical Engineering Conference, Niagara Falls, Canada. Oral presentation.

  18. D. Pjontek, A. Macchi (2014). Fluid dynamic studies in support of an industrial ebullated bed hydroprocessor. International Workshop on Fluid-Particle Systems, Vancouver, Canada. Oral presentation.

  19. D. Pjontek, V. Parisien, A. Macchi (2012). Local bubble characteristics in a bubble column and ebullated bed using a monofibre optical probe at elevated pressures, 62nd Canadian Chemical Engineering Conference, Vancouver, Canada. Oral presentation.

  20. D. Pjontek, J. Landry, C.A. McKnight, L.P. Hackman, A. Macchi (2011). Effect of a dispersed immiscible liquid phase on the hydrodynamics of a bubble column and ebullated bed. Gas-Liquid and Gas-Liquid-Solid Reactor Engineering Congress (GLS 10), Braga, Portugal. Oral presentation.