Selected Publications

  • Motaghi, A., Hrymak, A.N.*, “Microstructure characterization in direct sheet molding compound”, Polymer Composites (2017)
  • Kasemphaibulsuk, P., Holzner, M., Kuboki, T.*, Hrymak, A., “Foam injection molding of glass fiber reinforced polypropylene composites with laminate skins”, Polymer Composites (2017)
  • Meirson, G., Hrymak, A.N.*, “Two-Dimensional Long-Flexible Fiber Simulation in Squeeze Flow” Polymer Composites (2017)
  • Zhou, S., Hrymak, A., Kamal, M.R., “Electrical, morphological and thermal properties of microinjection molded polyamide6/multi-walled carbon nanotubes nanocomposites”, Composites Part A, 103 84-95 (2017)
  • Zhou, S., Hrymak, A., Kamal, M.R., “Electrical and morphological properties of microinjection molded polypropylene/multi-walled carbon nanotubes nanocomposites”, J Applied Polymer Science, 134 (43) 45462 (2017)
  • Yahyaee Soufiani, A, McDermid, J.*, Hrymak, A.N., Goodwin, F., “Numerical investigation of multiple-slot jets in air-knife wiping”, J Coating Technologies Research, pp 1-14 (2017)
  • Reinati, I., Hrymak, A.N., Margaritis, A.*, “Kinetics of cell growth and crystalline nanocellulose production by Komagataeibacter xylinus”, Biochemical Engineering Journal, 127, pp 12-31 (2017)
  • Zhou, S., Hrymak, A., Kamal, M.R., “Electrical and morphological properties of microinjection molded polystyrene/multi-walled carbon nanotubes nanocomposites”, Polymer Engineering and Science, 56(10), pp 1182-1190 (2016)
  • Hohberg, M., Kärger, L.*, Henning, F., Hrymak, A. “Rheological measurements and rheological shell model Considering the compressible behavior of long fiber reinforced sheet molding compound (SMC)” Composites Part A: Applied Science and Manufacturing, 95, pp. 110-117, (2017).
  • Javidi, M., Hrymak, A.N.*, “Simulation of concentrated suspensions in free surface systems”, Canadian Journal of Chemical Engineering, 94 (11), pp. 2145-2152, (2016)
  • Javidi, M., Pope, M.A., Hrymak, A.N.*, “Investigation on dip coating process by mathematical modeling of non-Newtonian fluid coating on cylindrical substrate”, Physics of Fluids, 28 (6), art. no. 063105, (2016)
  • Reiniati, I., Hrymak, A.N., Margaritis, A*. “Recent developments in the production and applications of bacterial cellulose fibers and nanocrystals”, Critical Reviews in Biotechnology, pp. 1-15 (2017).
  • Akbarzadeh, V., Hrymak, A.N.*, “Coupled Fluid-Particle Modeling of a Slot Die Coating System”, AIChE J., 62, pp 1933-1939 (2016)
  • Meirson, G., Hrymak, A.N.*, “Two-Dimensional Long-Flexible Fiber Simulation in Simple Shear Flow” Polymer Composites, 37(8), pp 2425-2433 (2016).
  • Akbarzadeh, V., Hrymak, A.N., Coupled CFD-DEM of particle-laden flows in a turning flow with a moving wall (2016) Computers and Chemical Engineering, 86, pp. 184-191.
  • Buck, F., Brylka, B, Muller, V., Muller, T., Weidenmann, K.A., Hrymak, A.N., Henning, F., Bohlke, T.*, “Two-scale structural mechanical modeling of long fiber reinforced thermoplastics”, Composites Science and Technology, 117, 159-167 (2015) DOI: 10.1016/j.compscitech.2015.05.020
  • Javidi, M. Hrymak,A.N.*, “Numerical simulation of the dip-coating process with wall effects on the coating film thickness”, J. Coatings Technology and Research, 12, 843-853, 2015
  • Kargar, A., Hrymak, A.N., F. Goodwin, “Near Roll Dross Particle Interactions in a Galvanizing Bath”, Iron and Steel Technology, February, 41-46, 2015.
  • Motaghi, A., Hrymak, A*, Motlagh, G., “Electrical Conductivity and percolation threshold of hybrid carbon/polymer composites”, J. Applied Polymer Science, 132, Article 41744, 2015.